Operating system problems, Common postscript problems – Samsung ML-2165W-XAC User Manual
Page 192
Operating system problems
192
5. Troubleshooting
4
Common PostScript problems
The following situations are PS language specific and may occur when several printer languages are used.
Problem
Possible cause
Solution
The PostScript file cannot be
printed.
The PostScript driver may not be installed
correctly.
•
Install the PostScript driver (see "Software installation" on page 82).
•
Print a configuration page and verify that the PS version is available for
printing.
•
If the problem persists, contact a service representative.
Limit Check Error report prints.
The print job was too complex.
You might need to reduce the complexity of the page or install more memory.
A PostScript error page prints.
The print job may not be PostScript.
Make sure that the print job is a PostScript job. Check to see whether the software
application expected a setup or PostScript header file to be sent to the machine.
The optional tray is not
selected in the driver.
The printer driver has not been configured to
recognize the optional tray.
Open the PostScript driver properties, select the Device Options tab, and set the
tray option.