Whirlwind SP1X3LUNT - Manual

SPLITTER-L
(SP1X3LUNT)
The SPLITTER-L provides one direct and two transformer isolated outputs from
one mic level input through an ultra-high quality Lundahl transformer.
INPUT
Female XLR input jack for connection of a low impedance balanced signal such
as that from a microphone.
DIRECT OUT, ISO 1 and ISO 2 (Male XLR Jacks)
The DIRECT OUT is a straight through connection from the input jack and will
pass phantom power. The ISO 1 and ISO 2 outputs each provide a low
impedance balanced output signal through a Lundahl LL1581XL transformer and
WILL NOT pass phantom power.
GND / LIFT (Buttons X 2)
Disconnects the ground between the corresponding input and ISO output when
set to the LIFT position. Ground remains connected when set to the GND
position. The DIRECT OUTPUT always has a connected ground.
PAD / OFF button engages a –20dB pad on the input for reducing the possibility
of overdriving the unit with strong input signals.
This product is warranted to be free of defects in materials or workmanship to the
original purchaser for a period of 3 years from the date of purchase. Should warranty
service be required, return the unit postage paid along with the original sales receipt to:
Whirlwind Music Dist., Inc.
99 Ling Road
Rochester NY 14612
Whirlwind will, at its option, repair or replace the unit. This warranty does not cover
damage resulting from abuse, unauthorized modifications or use of the product in
unintended applications.