Samsung LNS4041DX-XAP - Manual (Page 47)

English-45
Viewing Closed Captions (On-Screen Text Messages) - Analog
The Analog Caption function operates when watching regular analog channels or when you have an analog external component
(such as a VCR) connected.
1. Press the MENU button to display the menu.
Press the or buttons to select “Setup”, then press the ENTER button.
2. Press the or buttons to select “Caption”, then press the ENTER button.
3. Press the ENTER button to select “Caption”.
Press the or buttons to select “On”, then press the ENTER button.
4. Press the or buttons to select “Caption Mode”,
then press the ENTER button.
Press the or buttons to select submenu (Default, CC1~CC4 or Text1~Text4)
you want, the press the ENTER button.
Press the EXIT button to exit.
• The default is “CC1”.
• CC1: The Primary Synchronous Caption Service. These are captions in the primary language
that must be in sync with the sound, preferably matched to a specific frame.
• CC2: The Special Non-Synchronous Use Captions.
This channel carries data that is intended to augment information carried in the program.
• CC3: Secondary Synchronous Caption Service.
Alternate program-related caption data, typically second language captions.
• CC4: Special Non-Synchronous Use Captions. Similar to CC2.
• Text1: First Text Service. This may be various non-program related data.
• Text2: Second Text Service. Additional data, usually not program related.
• Text3/Text4: Third and Fourth Text Services.
These data channels should be used only if Text1 and Text2 are not sufficient.
• The Caption feature doesn’t work in COMPONENT(480p, 720p, 1080i), HDMI modes.
• The availability of captions depends on the program being broadcast.
BN68-01001A-01Eng.qxd 2/15/06 7:11 AM Page 45