Samsung LN32C540F2DXZA - Manual (Page 21)

21
English
03
Basic Featur
es
Menu Transparency (Bright / Dark) ■ : Set the
Transparency of the menu.
Melody (Off / low / Medium / high)
■ : Set so that a
melody plays when the TV is turned on or off.
nOTE
✎
Only available when the Input source is set to TV. x
To turn the melody off, set Melody to Off.
The
x Melody does not play.
When no sound is output from the TV because the –
MUTE button has been pressed.
When no sound is output from the TV because the –
volume has been reduced to minimum with the
VOl – button.
When the TV is turned off by – sleep Timer function.
Picture In Picture (PIP) ¦
PIP t
MEnU
O
m → setup → PIP → EnTER E
You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in
the same mode.
nOTE
✎
For PIP sound, refer to the x Sound Select instructions.
If you turn the TV off while watching in PIP mode, the x
PIP window will disappear.
You may notice that the picture in the PIP window
x
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
While
x V-Chip operation, the PIP function cannot be
used.
PIP Settings
x
Main picture sub picture
Component1, Component2,
hDMI1/DVI, hDMI2, hDMI3,
hDMI4, PC
TV
PIP (Off / On) ■ : Activate or deactivate the PIP function.
Air/Cable (Air / Cable) ■ : Select either Air or Cable as the
input source for the sub-screen.
Channel
■ : Select the channel for the sub-screen.
size ( ■ Х / Г): Select a size for the sub-picture.
Position ( ■ à / – / — / œ): Select a position for the
sub-picture.
sound select (Main / sub)
■ : You can choose the
desired sound (Main or sub) in PIP mode.
Support Menu
MEnU
O
m → support → EnTER E
self Diagnosis
Picture Test ■ : Use to check for picture problems. If the
problem continues to occur, check the Color pattern.
Yes: If the test pattern does not appear or there is
noise in the test pattern, select Yes. There may be a
problem with the TV. Contact Samsung’s Call Center for
assistance (1-800-SAMSUNG).
no: If the test pattern is properly displayed, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
sound Test
■ : Use the built-in melody sound to check for
sound problems.
If you hear no sound from the TV’s speakers,
✎
before performing the sound test, make sure
speaker select is set to TV speaker in the
sound menu.
The melody will be heard during the test even if
✎
speaker select is set to External speaker or the
sound is muted by pressing the
MUTE button.
Yes: If you can hear sound only from one speaker or not
at all during the sound test, select Yes. There may be a
problem with the TV. Contact Samsung’s Call Center for
assistance (1-800-SAMSUNG).
no: If you can hear sound from the speakers, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
signal Information
■ (digital channels only): An HD
channel’s reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
Troubleshooting
■ : If the TV seems to have a problem,
refer to this description.
If none of these troubleshooting tips apply, contact
✎
the Samsung customer service center.
BN68-02756A_Eng.indb 21 2010-08-31 �� 3:48:53