Samsung BD-C6800-XAA - Manual (Page 37)

English

05
Setup
Cinema : Outputs 2-channel movie sound over
multi-channels.
Music : Outputs 2-channel music over multi-
channels.
NOTE
If you are using an HDMI receiver, this option is
available when you set Digital Output setup to PCM.
You can use this option with analog 7.1ch output
when you don’t use HDMI receiver.
Speaker Setting
Set the speaker sound to obtain the best possible
surround sound.
This menu is available only when using 7.1ch
analog output.
Test Tone
A test tone will be sent to L ; C ; R ; RS ;
RSB ; LSB ; LS ; LFE in order, so you can
make sure the speakers are set up correctly.
The test tone can only be activated when no
discs are in the unit.
The test tone outputs through the 7.1 channel
analog outputs only.
•
•
✎
▪
▪
•
•
•
HDMI
If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS), the
player may output PCM 2ch downmixed audio
even though you set Bitstream (either Re-
encode or Audiophile) on your setup menu.
If your TV is not compatible with PCM sampling
rates over 48kHz, the player may output 48kHz
downsampled PCM audio even though you set
PCM Downsampling to Off.
Dynamic Range Control
You can listen at low volumes but still hear dialog
clearly.
This is only active when the player detects a Dolby
Digital signal.
Auto : The Dynamic Range Control is set
automatically based on the information provided
by the Dolby TrueHD Soundtrack.
On : When Movie soundtracks are played at low
volume or from smaller speakers, the system
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.
Off : You can enjoy the movie with the standard
Dynamic Range.
Downmixing Mode
Select whether to downmix the multi-channel
audio into fewer channels.
Normal Stereo : Downmixes the multi-channel
audio into two channel stereo. Choose when
the player is connected to equipment that does
not support virtual surround functions such as
Dolby Pro Logic.
Surround Compatible : Downmixes multi-
channel audio into surround compatible
stereo. Choose when the player is connected
to equipment that supports virtual surround
functions such as Dolby Pro Logic.
DTS Neo:6
You can enjoy multi-channel sound from a
2-channel audio source.
Off : Outputs a 2-channel audio signal through
the front speakers only.
•
•
•
•
•
•
•
•
Display
Audio
System
Network
Language
Security
General
Support
Settings
Speaker Setting
< Change " Enter ' Return
Front : Large
Center : Large
Surround : Large
Surround Back : Large
Subwoofer : On
Test Tone : Off