Samsung WEP170JBEG-XAR - Manual (Page 7)

5
En
g
lis
h
* If you have a Bluetooth phone that supports the hands-free Bluetooth profile,
see Enhanced features section for alternative pairing instructions.
IMPORTANT: If pairing was successful, the blue indicator light will flash 10 times rapidly
before going back to flashing every 3 seconds. If unsuccessful, the light remains solid,
and you’ll need to reattempt pairing (see steps 3–5 above).
4. Your phone will find the “Samsung WEP170” headset and ask if you want to pair with
it. Confirm this by pressing “yes” or “ok”.
5. Enter passkey or PIN 4 = 0000 (4 zeros), then press “yes” or “ok”.
5
Enhanced features (for Bluetooth phones with hands-free profiles)
Enhanced features are available for phones that support the hands-free Bluetooth
profile. Check your phone’s instruction guide or contact the phone manufacturer if
you are not sure if your phone supports the hands-free Bluetooth profile.
Once you’re done pairing, the following headset features will be available:
•
Last number redial (when not on a call)
While the headset is on, press and hold release
•
Rejecting an incoming call (when not on a call)
When your phone rings, press and hold release
•
Call-waiting (swapping between 2 calls)
When your phone notifies you of another incoming call while you’re on a call,
press and hold
release
•
Putting a call on hold
While you’re on a call, press and hold release immediately. Repeat to retrieve
the call