Viewing an external signal source, Setting the signal source – Samsung HPN4239X-XAC User Manual
Page 20
Setting the Signal Source
1
Press the MENU button. Press the ENTER button to
select “Input”.
2
Press the ENTER button to select “Source”.
3
Press the ▲ or ▼ button to select signal source, then
press the ENTER button.
Notes
• When you connect equipment to the PDP, you can choose between the following sets of jacks:
AV, S-Video, Component 1, Component 2, PC or DVI on the PDP’s rear panel.
38
Remote Control Codes
VCR Codes
Cable Box Codes
DVD Codes
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as VCRs, DVD, Set-Top box and the TV source (broadcast or cable).
39
Source
:
TV
√
Edit Name
√
Input
Move
Enter
Return
TV
AV
: VCR
S-Video
: - - - -
Component1 : - - - -
Component2 : - - - -
PC
: - - - -
DVI
: - - - -
Source
Move
Enter
Return
TV
AV
: VCR
S-Video
: - - - -
Component1 : - - - -
Component2 : - - - -
PC
: - - - -
DVI
: - - - -
Source
Move
Enter
Return