Samsung SGH-I317TSAATT - Manual (Page 121)

4. If not already active, touch the OFF/ON button to turn
S Beam ON .
5. On the source device, which contains the desired
image or video, touch
Apps ➔ Gallery.
6. Locate and touch the selected image to open it in the
preview window.
Important! Neither device must be in Lock mode or displaying
the Lock screen. They must both be active and
unlocked. It is recommended that the target device
be on the Home screen.
7. Place the two active NFC-enabled devices back to back
to begin.
Note: If the Touch to beam screen does not display on the
source device:
• Pull them apart.
• Verify the image is visible in the preview window on the source
device (providing the file).
• Place them together again.
8. From the Touch to beam screen, touch the reduced
image preview to begin the transfer.
9. When prompted, separate the two devices.
After a few seconds (depending on file size), the
transferred file will display on the recipient’s screen.
Sharing Multiple Photos with S Beam
To share multiple photos with S Beam:
1. On the source device (containing the desired image or
video), touch Apps ➔ Gallery.
2. Locate the selected folder.
3. Touch and hold the first image and place a check mark
on it and all desired images.
4. Place the two active NFC-enabled devices back to back
to begin.
5. From the Touch to beam screen, touch the reduced
image preview to begin the transfer.
6. When prompted, separate the two devices.
7. The photos are transferred to the other device.
Multimedia 113