Samsung BD-P1000-XAA - Manual (Page 15)

G
etting Started
English - 15
Unpacking
Accessories
Check for the supplied accessories below.
Preparing the Remote Control
Install Batteries in the Remote Control
• Open the battery cover on the back of the remote control.
• Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
• Close the battery cover.
If the remote does not operate properly:
• Check the polarity + - of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
Component Cable
(MD39-00107A)
HDMI Cable
(MF39-00299A)
Composite (Video),
Audio L/R Cable
(MF39-00274A)
Batteries for Remote
Control (AAA Size)
(4301-001035)
00057A
OPEN/CLOSE TV POWER
INPUT SEL. SCENE SEARCH
PLAY STOP
TV MUTE VOL
MENU
DISC MENU
AUDIO
MARKER
POPUP MENU TITLE MENU
REPEAT
CANCEL
REPEAT
INFO
SUBTITLE
ZOOM
RETURN
ENTER
CH
POWER
Remote Control
Instruction Manual
(AK68-01091A)
Quick Guide
(AK68-01118A)
Setting the Remote Control
You can control certain functions of another
manufacturer’s TV with this remote control.
Control function buttons include: TV POWER,
CH
, VOL + -, TV MUTE, INPUT SEL. button.
To determine whether your television is
compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the TV POWER button and enter
the two-figure code corresponding to the brand of
your television, by pressing the appropriate
number buttons.
Result: If your television is compatible with the remote
control, it will switch off.
It is now programmed to operate with the
remote control.
■ If several codes are indicated for your
television brand, try each one in turn until
you find one that works.
■ If you replace the remote control's batteries,
you must set the brand code again.
NOTE
Then you can control the television using the following
buttons after pressing the TV button.
Button Function
TV POWER Used to switch the television on and off.
INPUT SEL. Used to select an external source.
VOL (+ -) Used to adjust the volume of the television.
CH ( ) Used to select the desired channel.
TV MUTE Used to toggle the sound on and off.
■ The functions listed above will not necessarily
work on all televisions. If you encounter
problems, operate the television directly.
NOTE