Samsung SCH-R210LSAUSC - Manual (Page 19)

Call Functions 16
store the numbers in your Contacts along with special characters
called pauses.
• 2-Sec Pause — P pause — A two-second pause stops the calling
sequence for two seconds and then automatically sends the remaining
digits.
• Wait — W pause — A hard pause stops the calling sequence until you
press .
To manually call a number with pause(s) without storing it to your
Contacts:
1. Enter the number you wish to call.
2. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
• 2-Sec Pause — a two-second pause.
• Wait — a hard pause (awaits input from you).
3. Use the navigation keys to highlight the desired pause
option.
4. Press to enter the highlighted pause into your number
sequence.
Note: If you select 2-Sec Pause, P appears in the display. If you select Wait,
W appears in the display.
5. Press to call the number.
Making a Call — Speed Dialing
You can store phone numbers and contact names in your phone’s
Contacts list. Speed Dialing lets you quickly and easily dial any
contact in your Contacts list by using that contact’s location
number in the list. You can assign and change location (speed
dial) numbers for your contacts. (See “Assignment During Entry
Creation” on page 36.)
One-Touch Dialing
Speed Dial numbers 2 through 9 are special One-Touch dialing
numbers. You can call the phone numbers stored in your phone’s
Contacts list and assigned Speed Dial numbers 2 through 9 by
pressing and holding a single key.
Example: For Speed Dial number 3, press and hold the key until the
name and number appear in the display and the number is dialed.
Two-Touch Dialing
Memory locations 10 through 99 are special Two-Touch dialing
locations.
Example: For location number 13, briefly press , then press and hold
until the name and number appear in the display and the
number is dialed.