Samsung SGH-P107BSACIN - Manual (Page 5)

Setting Up the WAP Browser
8
Select soft key. You can also press the key
directly.
2. Select a proxy server and enter the parameters
required. Contact your service provider for
details.
The remaining options depend on the Bearer
setting, as indicated below.
When the bearer is set to Data
Parameter Description
Profile
Name Name that you wish to assign
to the HTTP proxy server.
Homepage
URL Address of your startup
homepage. When the default
homepage displays, you can
delete it using the
key and
enter your own choice.
Security Data transmission mode.
Choose
Secure to protect your
data against unauthorised
access; otherwise, choose
Non-Secure .
IP Address WAP gateway address required
to connect to the Internet.
Bearer Bearer to be used for each type
of network address accessed:
GPRS or Data .
Parameter Description
Login
Name PPP server login ID.
Password PPP server password.
Dial-up
Number PPP server phone number.
Setting Up the WAP Browser
9
When the bearer is set to GPRS
Note : The WAP Browser settings may vary,
depending on the service provider. Contact
your service provider for more information.
3. After selecting each of these settings, a dialogue
box displays; you can either enter the
information required or choose between given
options. When you are satisfied with your input,
press the
OK soft key.
4. When you have finished configuring the WAP
Browser, press the key or the right soft
key.
Data Call
Type Data call type: Analogue or
ISDN .
Parameter Description
User Name User ID required to connect to
the GPRS network.
Password Password required to connect to
the GPRS network.
APN Access point name used for the
address of the GPRS network
gateway.
Parameter Description