Anti-theft kensington lock, Assembling the cables, Other information – Samsung LT27A300ND-ZA User Manual
Page 36
36
English
Other Information
✎
NOTE
x
If you use screws that are longer than the standard specifications, the inside of the product may be damaged.
x
For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ
depending on the corresponding specifications.
x
Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling them using
excessive force. This may result in damage to the product or injury due to the product falling. Samsung shall not be
held liable for any damage or injury.
x
Samsung shall not be held liable for any damage to the product or injury caused by using a wall mount/desktop stand
that is not compatible with the specifications or due to an installation not performed by an authorized installation
engineer.
x
When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm (3.93 inches) of
space from the wall.
x
Use the wall mount according to the international specifications.
Anti-theft Kensington Lock
A Kensington Lock is a device you can use to physically fix your TV in place
when using it in a public place. You wrap the Kensington Lock’s cable around
a large, immobile object and then attach the lock to the Kensington slot on the
back of the TV.
The appearance and locking method may differ from the illustration below
depending on the manufacturer. Refer to the manual provided with the
Kensington Lock for additional information on proper use. The Kensington Lock
is not supplied by Samsung.
✎
Please find a “K” icon on the rear of the TV. A kensington slot is beside
the “K” icon.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington Lock cable.
3. Insert the locking device into the Kensington slot on the product 1.
4. Lock the lock.
✎
These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎
The locking device has to be purchased separately.
✎
The location of the Kensington slot may be different depending on the TV model.
Assembling the Cables
Use the Cable Holder to hide the cables behind the stand.
✎
The color and the appearance may differ depending on the product, and the specifications are subject to change
without prior notice to improve the performance.
1
<Optional>
<TV Rear>