Samsung WA50F9A7DSP-A2 - Manual (Page 34)

34_ troubleshooting
troubleshooting
COdE SymbOl mEANING SOlUTION
Mems sensor problem. Call for service.
Temperature sensor problem. Restart the cycle.
If the code reappears, call for service.
A fault is detected in the water
level sensor.
Call for service
This occurs when the temperature
exceeds 50, for over 8 seconds in
the Wool and Delicates course.
Call for service
When position of the clutch can’t
be detected.
Call for service
After position of the clutch is
detected, if the signal of the clutch
hall goes wrong, occurs error.
Call for service
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
F900A WASH_WA50F_USER MANUAL_DC68-03133H-04_EN.indd 34 2014-3-1 15:08:26