Samsung SC-D103-XAP - Manual (Page 78)

ENGLISH
78 78
IEEE 1394 Data Transfer
● System requirements
■ CPU : faster Intel ® Pentium III™ 450Mhz compatible.
■ Operating system : Windows ® 98SE, ME, XP, Mac OS (9.1~10.2)
■ Main memory : more than 64 MB RAM
■ IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV connection cable
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied)
from the DV jack of the camcorder to
the DV jack of the other DV device.
■ Make sure that DV IN appears on
the screen.
3. Press the START/STOP button to begin
REC PAUSE mode.
■ PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the
picture.
5. Press the START/STOP button to start recording.
■ If you want to pause recording momentarily, press the
START/STOP button again.
6. To stop recording, press the (STOP) button.
Notes
■ When using this camcorder as a recorder, the pictures that
appear on a monitor may seem uneven, however recorded
pictures will not be affected.
■ Operations are not guaranteed for all the recommanded
computer environments mentioned above.
●
■ CPU: Intel ® Pentium III™ 450Mhz
■ Windows ® 98SE, ME, XP, Mac OS(9.1~10.2)
■ 64MB RAM
■ IEEE 1394
■
■
■
■
■
DV USB
AUDIO
/VIDEO
S-VIDEO
MIC