Samsung SPH-M520ZSAQST - Manual (Page 217)

Section 2L: Using Bluetooth 191
Using Bluetooth
Using the Bluetooth Settings Menu
The Bluetooth Settings menu allows you to set up many of the
characteristics of your phone’s Bluetooth service, including:
ⅷ Entering or changing the name your phone uses for Bluetooth
communication.
ⅷ Setting your phone’s visibility (or “discoverability”) for other Bluetooth
devices.
ⅷ Displaying your phone’s Bluetooth address.
1. Select Menu > Settings > Bluetooth.
2. Use the navigation key to select On/Off, Visibility, Device Name,
Device Info, Trusted Devices, FTP Contents Folder, Select
Device type, or Voice Caller ID and press
.
Bluetooth Settings: My Bluetooth Device Name
The My Bluetooth Name section of the Bluetooth Settings menu allows you
to select a Bluetooth name for your phone. Your phone’s Bluetooth name
will appear to other in-range Bluetooth devices, depending on your visibility
settings.
To set a Bluetooth name for your phone:
1. Select Menu > Settings > Bluetooth > Device Name.
2. Press and hold to clear the current name.
3. Use your keypad to enter a new name and press to save and
exit.
Note: Enabling the Bluetooth option on your phone allows you to receive a
Caller ID announcement when an incoming call is detected by the
Bluetooth device (provided that Voice Caller ID has been turned on).
When an incoming caller has previously been saved to your Contacts
list, the user’s contact name will be announced via the headset. If an
incoming caller is not currently in your Contacts, only their phone
number is announced via the headset.