Samsung SPA800BX-XAA User Manual
Page 21
2.
Click on [Settings] tab and set the <Screen resolution> by
referring to <Resolution> described in
the display mode
table supported
by this projector.
You do not have to change <Color quality> setup.
3.
Press the [Advanced] button.
Another property window will appear.
4.
Click on [Monitor] tab and set the <Screen refresh rate> by
referring to <Vertical Frequency> described in
the display mode
table supported
by this projector.
Set up both the vertical and horizontal frequency instead of
<Screen refresh rate>.
5.
Click the [OK] button to close the window, and click the
[OK] button of the <Display Properties> window to close the
window.
The computer might begin restart automatically.
6.
Shut down the PC and connect to the projector.
Process might vary depending on the type of computers or Windows versions.
(For example, [Properties] appears instead of [Properties (R)] as shown in 1.)
This appliance supports up to 32 bits per pixel in Color quality when it is used as a PC monitor.
Projected images may differ from the monitor depending on monitor manufacture or Windows versions.
If a belt is shown or an abnormal signal occurs on the projector when your PC is turned off or disconnected, switch