Samsung YP-G1CWY-XAA - Manual (Page 110)

106
Network Notification
Have your device alert you to new Wireless Access Points (WAPs).
1. From a Home screen, touch the Menu Key ➔ Settings
➔ Wireless and network.
2. Touch Wi-Fi settings, then touch Network notification to
turn notifications On or Off. When on, a check mark
appears in the check box.
WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a standard for easy
and secure wireless network set up and connections. To use
WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS can
automatically set up a random network name and WPA wireless
security for wireless Wi-Fi phones, routers, access points,
computers, adapters, and other electronic devices.
WPS allows you to push buttons instead of entering a network
name and wireless security PIN.
1. From a Home screen, touch the Menu Key ➔ Settings
➔ Wireless and network ➔ Wi-Fi settings.
2. Touch WPS button connection.
3. Press the WPS button on your Wi-Fi access point within 2
minutes.
Advanced Settings
Set up and manage wireless access points.
1. From a Home screen, touch the Menu Key ➔ Settings
➔ Wireless and network ➔ Wi-Fi settings.
2. Touch the Menu Key ➔ Advanced for these settings:
• Advanced:
– Wi-Fi sleep policy: By default, Wi-Fi turns off when the screen times
out and data connections switch to mobile data. Use Wi-Fi sleep policy
settings to specify when to switch from Wi-Fi to mobile data for data
communications. Touch to choose from When screen turns off,
Never when plugged in, or Never.
– MAC address: View your device’s MAC address, required when
connecting to some secured networks (not configurable).
– IP address: The Internet Protocol (IP) address assigned to the phone by
the Wi-Fi network to which you are connected unless the IP settings,
below, are used to assign it a static IP address.
– Proxy: Touch to enter a proxy number.
– Port: Touch to enter a port number.
• IP Settings: Enter IP settings for configuring a connection to a
network using a static IP, including:
– Use static IP: Touch to turn static IP On or Off.