Samsung SCH-R560DAAMTR - Manual (Page 22)

19
Caution!: Keep the phone away from you ear while in Speakerphone Mode.
(For more information, refer to “Responsible Listening” on
page 141.)
• To disable Speakerphone Mode:
ᮣ Press and hold until “Speakerphone Off” appears in
the display.
Note: Your phone automatically enters Speakerphone Mode when you dial a
call using the QWERTY keypad and the called phone begins ringing.
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a key.
• To enter Silent Mode:
ᮣ In standby mode, press and hold . “Entering Silent
Mode” briefly appears in the display and your phone
returns to standby mode.
• To exit Silent Mode:
ᮣ While in Silent mode and standby mode, press and hold
. “Exit Silent Mode” briefly appears in the display
and your phone returns to standby mode.
Vibrate Mode
ᮣ In standby mode, repeatedly press the Volume key
( ) down until Vibrate appears in the display.
The Volume key is on the upper left side of phone.
Adjust the Ringer
1. In standby mode, press the Volume key ( ) on the
left side of the phone Up or Down.
Options are:
2. When you are satisfied with the setting, press or .
Your phone returns to standby mode.
Tip: You can also enter the Volume > Voice Calls sub-menu by pressing the
Menu soft key, then pressing the , , , and keys. Use the
Volume key on the left side of your phone to adjust the ringer volume
setting.
Note: The Vibrate icon ( ) appears in the display when the phone is in
Vibrate mode. The Vibrate/Ring icon ( ) appears in the display
when the phone is in Vibrate/High mode.
• Ringer Off • Medium
• Vibrate • Medium/High
• Low • High
• Low/Medium • Vibrate/High
r560.book Page 19 Tuesday, June 16, 2009 1:04 PM