Samsung SCH-R300ZKAXAR - Manual (Page 22)

19
• Press the Settings soft key, then press the Exit soft key to exit
VoiceSignal without dialing.
Pause Dialing From a Contacts Entry
If you voice dial a contact that contains 2-Sec Pause(s) simply
wait for the pauses to pass and the dialing to complete.
If you voice dial a contact that contains Wait(s), wait for the
appropriate prompt(s) from the number you are calling (credit
card number, bank account number, and so on) and enter the
appropriate response(s).
Answering a Call
Incoming
When you receive a call, the phone displays one of the following:
• If the caller can be identified, the caller’s number (or name if it’s in your
Contacts) appears in the display.
• If the caller cannot be identified, “Call from unavailable #”, “Call
from restricted #”, or no number appears in the display.
Tip: Assign pictures to Contacts entries. The entry’s assigned picture
appears in the display when you receive a call from that entry. (For more
information, refer to “Assigning a Picture to a Contacts Entry” on
page 35
The phone continues to notify you of the call until one of the
following events occurs:
• You answer the call.
• The calling party ends the call.
• The call is sent to voicemail.
Call Notification Features
Your phone notifies you of a call in a variety of ways.
• Eight ring volume settings: Ringer Off, Vibrate, Low, Low/Medium,
Medium, Medium/High, High, or Vibrate/High.
• Different ring types or melodies to distinguish callers.
• Name display with caller ID. (If the caller’s name is programmed into
your Contacts).
• Information about the last 90 each of incoming, missed, and outgoing
calls are automatically stored in a Calls log.
Set Call Ringer Volume
1. In standby mode, press the Volume key ( ) on the
left side of the phone up or down to set the call ringer
volume as desired. Options are:
2. Press SET once you’re satisfied with the setting. The phone
returns to standby mode.
• Ringer Off • Medium
• Vibrate • Medium/High
• Low • High
• Low/Medium • Vibrate/High