Samsung SPH-M570ZKASPR - Manual (Page 34)

22 2A. Phone Basics
Making and Answering Calls
Making Calls
1. Enter a phone number from standby mode. (If you
make a mistake while dialing, press
to erase
the numbers.)
2. Press . (To make a call when you are roaming
and Call Guard is enabled, press and press
. See “Call Guard” on page 125.)
3. Press when you are finished.
You can also place calls from your phone by speed
dialing numbers from your Contacts (page 30) and
using your History listings (page 64).
Dialing Options
When you enter numbers in standby mode, you will
see a variety of dialing options displayed as softkeys on
the phone’s screen.
To send a message to the number, press SEND
MESSAGE (left softkey).
– or –
To initiate an option, press OPTIONS (right softkey), then
press the corresponding softkey.
ⅷ Contact Details: Displays the details for a Contact if
the entered number matches a previously created
entry.
Tip: To redial your last outgoing call, press twice.
To redial other recent numbers, press , highlight a
number, and press again.
When making calls off the Nationwide Sprint Network,
always dial using 11 digits (1 + area code + phone
number).
Tip: To speed dial a phone number from standby mode,
press and hold the speed dial number. If the speed dial
number is two digits, enter the first digit, and then press
and hold the second digit. (For information on setting up
speed dial numbers, see “Assigning Speed Dial
Numbers” on page 70.) (This feature will not work when
you are roaming off the Nationwide Sprint Network; when
roaming you must dial using eleven digits [1 + the area
code + the seven-digit phone number].)
M570.book Page 22 Thursday, June 10, 2010 12:00 PM