Samsung SCH-R530RWBMTR - Manual (Page 167)

Configuring 4G Mobile Hotspot
1. From the Settings screen, under Wireless and network,
touch More settings ➔ Tethering and Mobile Hotspot ➔
4G Mobile Hotspot. The 4G Mobile Hotspot screen
displays.
2. Touch Configure to access the following options:
• Network SSID: View and change the name of your Mobile
Hotspot.
• Hide my device: When enabled, your Mobile Wi-Fi Hotspot is
not visible to other Wi-Fi devices during a scan. Other devices
can still connect to your Mobile Wi-Fi Hotspot, but a manual
connection is required that uses your Network SSID and
Password.
• Security: Choose the security level for your Mobile Wi-Fi
Hotspot.
• Password: If you choose a security level that uses a password,
enter the password. By default, the password is your mobile
telephone number.
• Show password: Enable to make the Password field visible.
• Show advanced options: Enable to access advanced options,
including Broadcast channel, to specify the channel your device
uses for Mobile Wi-Fi Hotspot.
Allowed Devices
Control whether devices connect to your Mobile Wi-Fi
Hotspot with the Allowed device list. After you add devices to
the list, they can scan for your device and connect using your
device’s Wi-Fi hotspot name (SSID) and password.
Note: Using the phone as a mobile hotspot consumes battery
power and uses data service. While Mobile Wi-Fi
Hotspot is active, the phone’s applications will use your
Wireless Provider’s data service. Roaming while using
the phone as a mobile hotspot will incur extra data
charges.
1. From the Settings screen, under Wireless and network,
touch More settings ➔ Tethering and Mobile Hotspot ➔
4G Mobile Hotspot. The 4G Mobile Hotspot screen
displays.
2. Touch Allowed devices ➔ , then enter the other
device’s Device name and MAC address.
3. Touch OK to add the device to the Allowed devices list.
Tip: For information about connecting to your 4G Mobile
Hotspot, see “4G Mobile Hotspot” on page 134.
162