Samsung SP2203XWCX-ZA User Manual
Page 46
3-5
Using
Video Type
If the screen quality is abnormal as a result of the projector not identifying the input signal type auto-
matically in <PC> or <HDMI> mode, Video Type lets you manually set the input signal.
•
In <PC> mode, the menu is only enabled for AV Timing (D-Sub) input signals. For separate H/V
sync, it is only enabled for a 1280 x 720p 59.94Hz/60Hz signal.
•
<Auto>-<RGB(PC)>-<RGB(AV)>-<YPbPr(AV)>
•
In <HDMI> mode, <Video Type> is only enabled for the 640x480p 59.94Hz/60 Hz and 1280x720p
59.94Hz/60 Hz signals.
•
<Auto>-<PC>-<AV>
Caption
The <Caption> function is supp
orted when the external analog signal from the Video input contains
subtitles.
•
<Caption> : <Off>-<On>
•
<Mode> : <Caption>-<Text>
•
<Channel> : <1>-<2>
•
<Field> : <1>-<2>
•
The <Caption> function will not operate in <PC> (including Component) or <HDMI> mode.
•
Depending on the external signal, a change to the channel or <Field> settings may be
required.
•
Each <Channel> and <Field> contains different information. <Field><2> carries additional
information to supplement information contained in <Field><1>.
(e.g. If English subtitles are provided on <Channel><1>, Spanish subtitles will be provided
on <Channel><2>.)
Reset
Using this function, you can reset various settings to the factory default settings.
•
<Factory Default> : Changes the settings to the factory defaults.
•
<Reset Filter Time> : Resets the filter time.
MENU
DESCRIPTION