Radio operation, Listening to radio, Presetting stations – Samsung HT-P50T-XAC User Manual

Page 34: Presetting stations 65

Advertising
background image

ENG

66

To tune in to a preset station, press on the
remote control to select a channel.

Refer to Step 2 on page 65 to
automatically or manually tune in
to a station.

2

1

Each time the button is pressed,
the band switches between
"FM

➝ AM".

“PRGM” flashes in the display.

3

Example: Presetting FM 89.1 in the memory

Press TUNING/CH
to select "89.10".

Press the TUNER
button and select the
FM band.

Press the TUNER MEMORY button before
‘PRGM’ disappears from the display.

‘PRGM’ disappears from the display and
the station is stored in memory.

5

4

You can select between 1 and
15.

Press the TUNER
MEMORY
button.

Press the TUNER
MEMORY
button
again.

6

To preset another
station, repeat
steps 2 to 5.

Press
to select preset
number.

RADIO OPERA

TION

You can store up to:

15 FM stations
15 AM stations

FM

Frequency Modulation

AM

Medium Wave

Presetting Stations

65

2

1

The selection toggles back and
forth between "

FM

AM"

each time the TUNER button is
pressed.

Tune in to the
desired station.

Press TUNER
button.

Automatic Tuning 2

Manual Tuning

2

1

Select a broadcast
station.

Press the STOP ( )
button to select

PRESET and then press
button to select the preset station.

Automatic Tuning 1

Press the Function
button to select the
desired band (FM,
AM).

Press the STOP ( ) button
to select "MANUAL" and

then press and hold button to
automatically search the band.

Automatic Tuning 2

Press STOP ( ) to select
MANUAL and then briefly

press

to tune in to a lower or

higher frequency.

Manual Tuning

Each time the button is pressed, the sound switches between "STEREO" and "MONO".

In a poor reception area, select MONO for a clear, interference-free broadcast.

Press MO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

When is pressed, a
preset broadcast station is
selected.

Press and hold TUNING/CH
to automatically search for
active broadcasting stations.

Briefly press TUNING/CH to
increase or decrease the
frequency incrementally.

Automatic Tuning 1

Remote Control Unit

Main Unit

You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or
manual tuning operation.

Listening to Radio

Up to 15 stations (30 total ; 15FM, 15AM) can be saved in memory.
If you save more than 15 stations, the oldest station previously saved is removed and a
new station is stored in its place.

Note

Advertising
This manual is related to the following products: