Configuración de la videocámara, Preparing – Samsung SC-L700-XAA User Manual

Page 19

Advertising
background image

How long will the battery last for recording?

Depends on how often you are likely to use the zoom
feature during recording.

Recharging the Battery Pack

1. Attach the battery pack to the

camcorder.

2. Connect the AC Power Adapter to the

AC cord and connect the
AC cord to a wall socket.

3. Connect the DC cable to the

DC jack of the camcorder.

4. Turn off the camcorder power, and the

recharging indicator will start blinking
and begin recharging.
-

Blinking once a second : Indicates
less than 50% has been charged.

-

Blinking twice a second : Indicates
50% ~ 75% has been recharged.

-

Blinking three times a second : Indicates 75% ~ 100% has
been recharged.

-

Blinking stops and stays on : Recharging has been
completed.

-

On for a second and off for a second: Indicates there is an
error. Reset the battery pack and DC cable.

5. If recharging is completed, separate the camcorder,

AC power adapter, and battery pack.

Even if the power is turned off, battery will be
discharged.

Note: Battery pack may be charged a little at the time

of purchase.

Preparing

To use the Battery Pack

ESPAÑOL

ENGLISH

19

Para el uso de la batería

¿Qué duración tendrá la batería para filmar?

La frecuencia con que se usan las lentes de zoom.
Prepare tantas baterías como sea posible.

Recarga de la batería

1. Conecte la batería a la videocámara.

2. Conecte el adaptador de corriente AC

a un cable AC y conecte el cable a
una toma de pared.

3. Conecte el cable DC a un jack DC de

la videocámara.

4. Apague la videocámara y el indicador

de recarga comenzará a parpadear y
comenzará la carga.
-

Parpadeo una vez por segundo: Indica
que se ha cargado menos del 50%.

- Parpadeo dos veces por segundo: Indica que se ha

cargado el 50% ~ 75%.

-

Parpadeo tres veces por segundo: Indica que se ha
cargado el 75% ~ 100%.

-

Se detiene el parpadeo y la luz es contínua: Se ha
completado la recarga.

-

Encendido y apagado cada segundo: Indica algún error.
Vuelva a colocar la batería y el cable DC.

5. Si se ha completado la recarga, separe la videocámara,

el adaptador de corriente y la batería.

Incluso si se ha apagado la cámara, se descargará la
batería.

Nota: La batería puede estar parcialmente cargada en el

momento de la compra.

Configuración de la videocámara

1

4

2

3

OFF

Advertising
This manual is related to the following products: