Samsung SM-G860PZBASPR - Manual (Page 35)

that vary based on the time of access will
be determined based on the location of
the network equipment providing service
and not the location of your Device or your
Device’s area code (if applicable).
Push-to-Talk Charges: Charges for push-to-
talk calls are billed to the person who starts
the call and calculated by multiplying the
duration of the call by the applicable rate
and number of participants. You’re charged
at least 6 seconds of airtime for each call
you start; subsequent communications in
the same call are rounded up to and billed
to the next second. Time begins when you
press any button to start a push-to-talk call
and ends approximately 6 seconds after
completion of a communication to which
no participant responds. Subsequent push-
to-talk communications are considered
new calls. Charges apply for the entire
period of time the push-to-talk call is
connected to our network. Depending
on your plan, nationwide, international,
or group push-to-talk calls may use the
local push-to-talk minutes in your plan and
result in additional or different charges.
Responses to call alert transmissions are
treated as new push-to-talk transmissions
even when responding within 6 seconds
of receiving the alert. Push-to-talk billing
methods are subject to change as we
introduce new push-to-talk Services.
Data Usage: Unless we specifically tell you
otherwise, data usage is measured in bytes,
kilobytes, megabytes, and gigabytes—
not in minutes/time. 1024 bytes equals 1
kilobyte (“KB”), 1024 KB equals 1 megabyte,
and 1024 megabytes equals 1 gigabyte.
Bytes are rounded up to KB, so you will
be charged at least 1 KB for each data
usage session (“data session”). Rounding
occurs at the end of each data session,
v.7-1-13 General Terms and Conditions of Service 35