Samsung SCH-A970ZSVXAR - Manual (Page 39)

Section 3: Call Functions 39
Voice Signal
Sect
ion 3
on your phone. Voice Signal software automatically
voice activates all contacts for voice dialing and
searching, no pre-recording or training needed. Speak
phone numbers naturally to dial, and use voice
commands to launch applications and navigate phone
menus.
Voice Signal Settings
You can adjust the settings and preferences for Voice
Signal by opening the Voice Settings menu. Using this
menu, you can change the following Voice Command
features:
• Choice Lists: If Voice Signal is not absolutely confident that it
has correctly identified a name or number, it can display a
choice list of up to three possibilities, and prompt you to
confirm the correct one. You can control when choice lists
appear by changing the Choice Lists setting to the following:
• Automatic: Voice Signal displays a choice list when it is not
confident it has identified the correct choice from among
multiple alternatives.
• Always On: When there are multiple alternatives, Voice
Signal always displays a choice list.
• Always Off: Voice Signal never displays a choice list.
Instead, the application picks the best from among the possible
choices.
• Sensitivity: In Voice Signal, sensitivity controls the balance
between rejecting too much, which means the phone
frequently does not recognize names, numbers, or commands,
and rejecting too little, which means it frequently recognizes
something even if nothing was said. When Voice Signal rejects
an utterance, it displays a message such as “Please repeat…”
or “No match found.” If you frequently experience these
messages, you might be able to get better recognition by
adjusting the Sensitivity setting toward Reject Less. If you