Samsung MH17WSSS - Manual (Page 33)

Sort It's used to exchange the numbers of two channels.
Name If channel name information is broadcast when you store the channels either
manually or automatically, the names are assigned to the channels directly. You can
however change these names or assign new names as required.
Fine Tune Due to weak signals or an incorrect antenna configuration, some of the channels
may not be tuned correctly.
LNA Amplifies signals when antenna reception is poor. However if incoming signals are
interfering with each other, turn off LNA as it malfunction.
• On / Off
Setup
Available Mode : PC / DVI : TV : Ext. : AV : S-Video : Component
OSD Description Play
Area
Configuration When you turn the power on of the product for the first time since it
released from a factory, menu to select location will appear.
Choose the region and country where you use the monitor.
This is because broadcasting type varies according to region and country.
You can select broadcasting type in OSD menu as well by selecting
MENU-Setup-Area Configuration.
Note : This product can be used worldwide when area configuration is set
up regardless of broadcasting type.
Note : When country is not selected properly, the product may not locate
channels.
Language You can choose one of 8 language.
Note : The language chosen affects only the language of the
OSD.
It has no effect on any software running on the computer.
Sleep Timer Use to set the Monitor to turn off automatically a set number of minutes.