Samsung SCH-U750HAAVZW - Manual (Page 32)

28
Tones Only (which plays a tone to prompt you to say a Voice
Command)
– Audio Playback: Allows audio playback to play through the
speakerphone or through the earpiece.
– Timeout: Allows you to set the timeout interval. If not used within 5 sec
or 10 sec Voice Command will timeout and return to the Home screen.
• Key Settings: Allows you to select the method the Voice Command
menu can be accessed. Select Voice Key Only, Voice Key / Headset,
Voice Key / Flip.
Voice Commands
The following is a list of functions that you can perform using
Voice Commands speech recognition on your phone.
• Call <Name or #>: Dial by saying
a Name in your Contacts List, a
Name and a Location (home,
work, mobile) or the phone
number.
• Send <Msg Type>: Start a text,
picture, voice or video message to
a number or to someone in your
Contacts List.
• Go To <Menu>: Go to any menu
on the phone.
• Check <Item>: Provides details of your phone status, Voicemail,
Messages, Missed Calls, Time, Signal Strength, Battery Level, Volume
Level, Balance, Minutes, Payment, and My Number.
• Contacts <Name>: Open the contact record for any name in your
Contacts List.
• Redial: Allows you to call the last number dialed.
• Play <All Songs/Playlist Name>: Opens a music playlist.
• My Verizon: Provides information about your Verizon Wireless
account.
• Help: Provides a helpful tutorial on how to use Voice Commands.
Call <Name or #>
Call Digit Dialing
Digit Dial allows you to dial any phone number by simply
speaking the digits into the phone. No training is necessary, and
Digit Dial is programmed to understand natural speech.
1. From the Home screen, press the Voice Commands key
.
2. After a brief pause, a list of optional commands appears in
the display and the audio prompt "Please say a command"
plays through the earpiece or speakerphone.
3. After the beep, say “Call” at a distance of 3-12 inches from
the phone in a natural voice.
u750.book Page 28 Sunday, April 5, 2009 8:40 PM