Samsung LNS4695DX-XAA - Manual (Page 74)

English-72
Viewing Closed Captions (On-Screen Text Messages)
1 Press the MENU button. Press the or button to select “Setup”,
then press the ENTER button.
2 Press the or button to select “Caption”, then press the
ENTER button.
3 Press the or button to select “Caption”, then press the
ENTER button.
Press the or button to select “On”, then press the ENTER button.
Analog
The Analog Caption function operates in either analog TV channel mode or external source mode.
(Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)
4 Press the or button to select “Caption Mode”, then press the
ENTER button.
Press the or button to select submenu (CC1~CC4 or Text1~Text4)
you want, then press the ENTER button.
Select “Return” by pressing the or button, then press the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
The default is “Default”.
CC1 : The Primary Synchronous Caption Service. These are captions in the primary language that must be in sync with the sound,
preferably matched to a specific frame.
CC2 : The Special NonSynchronous Use Captions. This channel carries data that is intended to augment information carried in the program.
CC3 : Secondary Synchronous Caption Service. Alternate program-related caption data, typically second language captions.
CC4 : Special Non-Synchronous Use Captions. Similar to CC2.
Text1 : First Text Service. This may be various non-program related data.
Text2 : Second Text Service. Additional data, usually not program related.
Text3/Text4 : Third and Fourth Text Services. These data channels are used only if Text1 and Text2 data bandwidth is not sufficient.
The Caption feature only works in TV, AV and S-Video mode.
The availability of captions depends on the program being broadcast.
BN68-01047J-01Eng.qxd 7/13/06 4:50 AM Page 72