Samsung HLT7288WX-XAA - Manual (Page 75)

English - 75
Continued...
Zooming-In
1 After switching the mode to WISELINK, select a memory device that you have installed.
(Refer to page 70~71)
2 Press the ENTER button to select Photo.
JPEG files and existing folders are displayed.
3 Press the ▲ or ▼ button to select a photo, then press the ENTER button.
➢ Pressing the button over a photo icon shows the currently selected photo in full
screen.
4 Press the TOOLS button.
Press the ▲ or ▼ button to select Zoom, then press the ENTER button.
Each time the ◄ or ► button is pressed, the photo size decreases or increases.
(x1 → x2 → x4)
● x1: Restore the photo to its original size.
● x2: Zoom-in to the photo x2.
● x4: Zoom-in to the photo x4.
5 To move the enlarged photo image up/down/left/right, press the ENTER button,
then press the ▲/▼/◄/► buttons.
➢ Note that when the enlarged picture is smaller than the original screen size, the
location change function doesn’t work.
To exit WISELINK mode, press the EXIT button on the remote control.
➢ The enlarged file is not saved.
Press the WISELINK button on the remote control to turn on the WISELINK mode.
Zoom function information icon (Displayed at the top left of the screen).
Icon Current OSD Function
Zoom (x 1) Restore a photo to its original size.
Zoom (x 2) Zoom-in to a photo x2.
Zoom (x 4) Zoom-in to a photo x4.
Pan Up Pan up to view the upper part of a zoomed-in photo.
Pan Down Pan down to view the lower part of a zoomed-in photo.
Pan Left Pan left to view the left side of a zoomed-in photo.
Pan Right Pan right to view the right side of a zoomed-in photo.
Start Slide Show
Zoom
Rotate
Background Music
On
Background Music Setting
Delete
Picture Setting
Sound Setting
Move Enter
Zoom Out Zoom In
x2
Folder 1 2007/1/2
File 1.jpg 2007/1/2
File 2.jpg 2007/1/2
File 3.jpg 2007/1/2
File 4.jpg 2007/1/2
USB  Device  Zoom  Option
Photo
BP68-00640A-00Eng.indb 75 2007-04-23 ¿АИД 4:17:44