Samsung SGH-I527ZKBATT - Manual (Page 107)

Photos and Videos 100
Camera and Camcorder Settings
This section describes the different settings that you can
configure on your camera. Not all of the following options are
available in both still camera and video camera modes. The
available options vary by mode.
1. From the viewfinder, touch (Quick Settings) ➔
(Camera Settings).
2. The follow settings are located under the Camera,
Camcorder, and General tabs. The settings that are
displayed will depend on what camera mode you are
in.
Camera
• Photo size: Select a resolution for photos. Use higher
resolution for higher quality. Higher resolution photos take up
more memory.
• Face detection: Adjusts the camera focus based on face
detection technology.
• Metering modes: Sets how the camera measures or meters
the light source: Center-weighted, Matrix, or Spot.
• ISO: Determines how sensitive the light meter is on your digital
camera. Choose from Auto, 100, 200, 400, or 800. Use a
lower ISO number to make your camera less sensitive to light, a
higher ISO number to take photos with less light, or Auto to let
the camera automatically adjust the ISO for each of your shots.
• Anti-Shake: Compensates for camera movement.
• Save as: Assigns rich tone usage to an image.
Camcorder
• Video size: Selects a resolution for videos. Use higher
resolution for higher quality. Higher resolution videos take up
more memory.
Settings
• Location tag: Attaches a GPS location tag to the photo. To
improve GPS signals, avoid recording in locations where the
signal may be obstructed, such as between buildings or in
low-lying areas, or in poor weather conditions. Your location
may appear on your photos when you upload them to the
Internet. To avoid this, deactivate the GPS tag setting.