Samsung SPH-M910ZIASPR - Manual (Page 33)

2A. Device Basics 19
Dev
ice
Basics
Installing the Battery
ᮣ See “Setting Up Your Device” on page 2.
Removing the Battery
1. Make sure the power is off so that you don’t lose
any stored numbers or messages.
2. Press the battery cover and slide it away from
camera lens.
3. Carefully remove the battery from the device.
Charging the Battery
Keeping track of your battery’s charge is important. If
your battery level becomes too low, your device
automatically turns off, and you will lose any
information you were just working on.
Note: Long backlight settings, searching for service, vibrate
mode, browser use, and other variables may reduce
the battery’s talk and standby times.
Tip: Watch your device’s battery level indicator and charge the
battery before it runs out of power.
WARNING: Do not handle a damaged or leaking Li-Ion
battery as you can be burned.
Release Latch
SPH-M910.book Page 19 Monday, June 14, 2010 1:08 PM