Samsung SPH-M910ZIASPR - Manual (Page 177)

3B. Web and Data Services 163
Web
a
n
d
Da
ta
Ⅲ If secured, you will also need to enter your WAP’s
password. The
show password option , reveals the
password as you type it vs only showing asterisks
(****).
Ⅲ Tap Save to store the new information and
connect to your target WAP.
To manually scan for a Wi-Fi network:
1. Press > and tap >
Wireless & networks > Wi-Fi settings.
2. Press and tap Scan .
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status
at a glance:
– Wi-Fi is connected and active.
– Wi-Fi active but there is a communication
issue with the target Wireless Access Point
(WAP).
Using the Wi-Fi Settings Menu
The Wi-Fi settings - Advanced menu allows you to set
up many of your device’s Wi-Fi service, including:
ⅷ Setting your Wi-Fi sleep policy
ⅷ Viewing your device’s MAC Address
ⅷ Configuring use of either a DHCP or Static IP
To access the Bluetooth Settings menu:
1. Press > and tap >
Wireless & networks > Wi-Fi settings .
2. Press and tap Advanced .
Email
Your device’s Email applications let you access and
manage multiple email accounts simultaneously in one
convenient location.
Although there is a separate Gmail application,
the main email application can manage both
Internet-based email services (Gmail™ and Yahoo™)
and Corporate Work Email (Outlook
® ).
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
SPH-M910.book Page 163 Monday, June 14, 2010 1:08 PM