Samsung LS57BPHNBG-ZA - Manual (Page 10)

English - 10
Rear of the PDP Display
➢  Select ID input on the menu. Use the numeric buttons to enter the ID for PDP Display
adjustment. You can operate the remote control only for the PDP Display that has been selected.
 For details about Multiple Display Control, refer to “Setting the MDC (Multiple Display Control)”
on page 24.
Example for Multiple Display Control connections
1 Connect the PC cable between the PC IN
and PC OUT on the rear of each PDP in
the form of daisy chain.
2 Connect the PC cable between the RGB
IN on the rear of the last connected PDP
and the PC OUT on the rear of the PC.
Rear of the PDP Display
1 Connect the RS232C cable between the
RS-232C IN and RS-232C OUT on the
rear of each PDP in the form of daisy
chain.
2 Connect the RS232C cable between
the RS-232C IN on the rear of the last
connected PDP and the RS-232C OUT
on the rear of the PC.
BN68-01364A-02Eng_1009.indd 10 2007-10-09 ¿АИД 2:24:10