Hot surface indicator, Cooking areas – Samsung NE595R0ABSR-AA User Manual

Page 19

Advertising
background image

SURF

A

CE COOKING

Surface cooking _18

Location of the radiant surface elements and controls

The radiant control knobs operate the radiant surface elements on the cooktop as shown below.

1

5

2

3

4

6

1. Single element: Left rear
2. Single element: Right rear
3. Dual element: Left front
4. Dual element: Right front
5. Warming center: Center rear
6. Hot surface indicator

Hot surface indicator

• Comes on when the unit is turned on or hot to the touch.

• Stays on even after the unit is turned off.

• Glows until the unit is cooled to approximately 150 °F.

Cooking areas

• The cooking areas on your range are identified by permanent circles on the glass cooking

surface. For the most efficient cooking, fit the pan size to the element size.

• Pans should not extend more than ½” to 1” beyond the cooking area.

• When a control is turned on, a glow can be seen through the glass cooking surface. The

element will cycle on and off to maintain the preset heat setting, even at high settings.

• For more information on selecting proper types of cookware, refer to the section “Using the

proper cookware” on page 21.

NE595R0ABSR_AA_DG68-00433A-05_EN.indd 18

02/01/2014 11:27:42

Advertising