Samsung SCH-A850BKVXAR - Manual (Page 109)

Section 8: Changing Your Settings 105
Ringer Settings
Sect
ion 8
Data Settings
1. In standby mode, press the Menu, use the right
navigation key to highlight Settings & Tools. Press
Call Settings. The Call Settings sub menus listed
in the display.
2. Press
Data Settings. The following options appear
in the display. Press the key to choose from the
following options:
• Data Off: Phone operates in normal voice call mode.
• Data For Next Call : Data call is enabled for next call only.
Phone will reset to Data Off mode after call.
• Data Until Powered Off : Phone will remain in Data Mode
until phone is powered off.
Ringer Settings
1. In standby mode, press the Menu, use the right
navigation key to highlight Settings & Tools. Press
Sounds. The Sounds sub menu is listed in the
display.
2. Press the
Call Sounds. Press
Call Ringtone.
Available options are:
• Get New
• Beep Once
• VZW Default Tone
• Bell 1
• Bell 2
• Melody 1-7
• No Ring
3. Press Call Vibrate to set the Call Sounds to vibrate.