Avital AVISTART 6501 - Manual (Page 12)

Number of chirps and flashes Explanation
2 three-second flashes
or 1 three-second flash
Remote automatic temperature-controlled
starting. 2 = activation, 1 = deactivation.
0 chirps, 4 light flashes Remote valet activation.
0 chirps, 3 light flashes Remote valet deactivation.
6 chirps, 0 light flashes Remote sensor bypass.
2 chirps and flashes, then 3 more chirps
and flashes
Armed and a door is open or ajar.
0 chirps, 4 light flashes
Remote start attempt and system is in
Protected Valet Mode.
Remote Engine Start - Safety and Counter-Theft
I CAUTION: Be sure to read the "WARNING" bulletin on the inside
cover of this manual before attempting to operate remote start.
Automatic Safety and Counter-Theft Features
Before remote starting your engine, the AviStart system will automatically
perform a safety check to ensure the following conditions have been met:
• Brake pedal is not depressed.
• Engine and ignition are turned "OFF."
• Hood is closed.
After remote starting your engine, the AviStart system will shut off the engine
immediately if the ignition is "OFF" and any of the following occurs:
• The hood is opened.
• The brake pedal is pressed.
• The alarm is triggered.
• The remote control s button is pressed.
• The 20 or 30 minute programmable run time expired.
Visual Fault Indication
The AviStart has a built-in fault detection system that automatically scans all of
the safety zones, prevents the system from remote starting and provides a
visual indication if a fault is detected. The parking lights will flash 1 time if the
hood is opened or if the brake pedal is depressed and will not allow the
engine to start. If this occurs, bring your vehicle to your authorized Avital
dealer for service.
10
AviStart 6501 Owner's Manual - 0999