Samsung SM-P905VZKAVZW - Manual (Page 69)

63
Controlling the Camera Remotely
Remote viewfinder allows you to take photos using the
viewfinder of a connected device (not included). Wi-Fi Direct
connection is required.
1. Touch Options ➔ Share ➔ Remote viewfinder.
2. Touch Wi-Fi Direct settings to connect the device and
the camera using Wi-Fi Direct.
3. Touch to take a photo remotely using the device as a
viewfinder.
Configuring Settings for Camera
Ⅲ Touch to configure settings for Camera. Not all of
the following options are available in both still camera
and video camera modes. The available options vary
depending on the mode used.
Camera
• Photo size: Select a resolution. Use higher resolution for higher
quality. Higher resolution photos take up more memory.
• Burst shot: Take a series of photos of moving subjects.
• Tap to take pics: Touch the image on the preview screen to
take photos.
• Face detection: Set the device to recognize people’s faces and
help you take photos of them.
• Metering modes: Select a metering method. This determines
how light values are calculated. Center-weighted measures
background light in the center of the scene. Spot measures
the light value at a specific location. Matrix averages the
entire scene.
• ISO: Select an ISO value. This controls camera light sensitivity.
It is measured in film-camera equivalents. Low values are for
stationary or brightly-lit objects. Higher values are for fast-
moving or poorly-lit objects.
• Smart stabilization: Activate or deactivate anti-shake.
Anti-shake helps focus when the camera is moving.
• Save as: Set the device to delete the original photo when
taking photos with rich tone mode.