Samsung DVD-F1080-XAA User Manual
Page 18
ENG-
18
C
O N N E C T I O N S
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
-
Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 48 to 49)
- The position of jacks may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Connecting to an
Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using a Coaxial cable (not included), connect the DIGIT
AL
AUDIO OUT (COAXIAL)
jack on the rear of the DVD player to
the
DIGIT
AL AUDIO IN (COAXIAL)
jack of the
Amplifier.
2
Using the video signal cable(s), connect the VIDEO,
COMPONENT
or HDMI OUT jacks on the rear of the DVD
player to the
VIDEO,
COMPONENT
or HDMI-DVI IN jacks of
your TV as described on pages 12 to 16.
3
T
urn on your DVD player, TV, and Amplifier.
4
Press the input select button of the
Amplifier to select the audio
input your DVD player is connected to in order to hear sound.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Coaxial Cable
(not included)
Dolby digital or
DTS amp
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 18