Samsung NV10 - Manual (Page 20)

ŝ19Ş
ƈ How to use the MOVIE CLIP mode ( )
A movie clip can be recorded for as long as the
available recording time of the memory capacity
allows.
1. Select the MOVIE CLIP mode by rotating the
mode dial. (Available recording time will display on
the LCD monitor)
2. Point the camera towards the subject and
compose the image by using the LCD monitor.
Press the shutter button and movie clips are
recorded for as long as the available recording
time allows. Movie clips will still be recorded if the
shutter button is released.
If you wish to stop recording, press the shutter button again.
* Image size and type are listed below.
- Image size : 640X480, 320X240 (Selectable)
- File type
: *.avi (MPEG-4)
[MOVIE CLIP mode]
ƈ How to use the SCENE mode ( )
Use the menu to easily configure optimal settings
for a variety of shooting situations.
Select the Scene mode by rotating the mode dial.
ſ Refer to page 33 for more information about the
menus.
[SCENE mode]
ƈ How to use the ASR (Advanced Shake Reduction)
mode ( )
Advanced Shake Reduction (ASR) mode.
This mode will reduce the effect of camera shake
and help you get a well-exposed image in dim
conditions.
ƃ Things to watch out for using the ASR mode
1. The digital zoom will not operate in the ASR mode.
2. If the lighting conditions are brighter than fluorescent
lighting condition, the ASR doesn’t activate.
3. If the lighting condition is darker than in
fluorescent lighting condition, camera shake
warning indicator ( ) will display. For best results only take pictures in
situations where the camera shake warning indicator ( ) is not displayed.
4. If the subject is moving the final image captured may be blurred.
5. Avoid moving the camera while the [Capturing!] message is displayed to
achieve a better result.
6. As the ASR uses the camera’s digital processor, images taken using the ASR
may take a little longer for the camera to process.
ƈ How to use the Special Effect mode ( )
It is possible to add special effects to your images
by using this mode. Select the Special Effect mode
by rotating the mode dial.
ſ Refer to page 33-35 for more information about
the special effect menus.
[SPECIAL EFFECT mode]
[ASR mode]
Starting the recording mode