Samsung LS22CRNSF-XAA - Manual (Page 16)

output terminal of the external device using a VIDEO cable.
3. S-VIDEO
: Connect the [S-VIDEO] terminal of your monitor to the S-
VIDEO output terminal of the external device using a S-VIDEO
cable.
4. ANT IN
1. Connects to an air antenna.
2. Connects to a cable system.
For more information on how to connect antennas, see
"
Connecting TV " in the Installation section.
5. DVI/PC IN
1. DVI-D
: Connect the DVI cable to the [DVI-D] port on the back of your
monitor. (With DVI, only PC input signals are supported.)
2. HDMI/PC DVI-D AUDIO IN
: Connect the [HDMI/PC DVI-D AUDIO IN] terminal at the back
of your monitor to your computer’s sound card.
6. COMPONENT IN
1. R - AUDIO - L
: Connect the port of the DVD, VCR (DVD / DTV Set-Top Box)
to the [R-AUDIO-L] port of the monitor.
2. P
R
, P
B
,Y
: Connect the VIDEO OUT port of the DVD / DTV Set-Top Box
to the [P
R , P B ,Y] input ports using a component video cable (P R
,
P
B
,Y).
7. DIGITAL AUDIO OUT(OPTICAL)
/ SERVICE
1. DIGITAL AUDIO OUT(OPTICAL)
: Connect the [DIGITAL AUDIO OUT(OPTICAL)] terminal of
your monitor to the digital sound output or standard sound
output terminal of the DVD home theater (or amplifier) using a
digital audio optical output cable.
2. SERVICE
: This is a reserved terminal used for servicing.