Samsung SPH-L300ZSASPR - Manual (Page 180)

Camera and Video 169
 Image quality: allows you to set the image quality to: Superfine, Fine, or Normal.
 GPS tag: allows you to turn GPS On or Off (also known as Geotagging). The
location of where the picture is taken is attached to the picture. (Only available in
Camera mode.)
 Save as flipped: reverses and saves the image if the photo was taken in self-portrait
mode.
 Storage: allows you to configure the default storage location for images or videos as
either Phone or MicroSD card (if inserted).
 Reset: allows you to reset all camera or camcorder settings to the default values.
Camcorder Settings
Open the menu panel to change the camcorder settings. You can also switch between photo
and video modes from the menu panel.
Change Advanced Settings
To change the advanced settings on your camcorder, refer to the following procedures.
► Tap in the menu panel to display the Settings menu and access more camera
settings. You can change the following settings from the Settings menu:
 Edit shortcuts: allows you to set shortcut icons for the settings that you use the
most.
 Self-recording: allows you to set the front camera so you can take videos of yourself
or video chat.
 Flash: allows you to set the flash options to Off or On.
 Recording mode: allows you to set the recording mode to either Normal (limited
only by available space on the destination location) or Limit for MMS (limited by
MMS size restrictions).
 Exposure value: allows you to adjust the brightness level.
 Timer: allows you to set a timer for how long to wait before taking a video. Choose
from: Off, 2 sec, 5 sec, or 10 sec.
 Effects: allows you to change the color tone or apply special effects to the photo.
Choose from: None, Negative, Black and white, or Sepia.
 Resolution: allows you to set the image size to one of the following: 1280x720,
720x480
, 640x480, or 320x240.