Speaker select (external speaker / tv speaker), Spdif output, Sound reset – Samsung LN22C500B2FXZA User Manual

Page 17: Time

Advertising
background image

17

English

03

Basic Featur

es

speaker select

(External speaker / TV speaker)

A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External speaker.

When

✎

speaker select is set to External speaker, the

volume and

MUTE

buttons will not operate and the

sound settings will be limited.
When

✎

speaker select is set to External speaker, you

should use these settings.

TV speaker: Off, External speaker: On

x

When

✎

speaker select is set to TV speaker, you

should use these settings.

TV speaker: On, External speaker: On

x

If there is no video signal, both speakers will be mute.

✎

sPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.

Audio Format

■

: During the reception of a digital TV

broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.

By connecting to 5.1ch speakers in a dolby

✎

digital setup, maximize your interactive 3D sound
experience.

Audio Delay

■

: Correct audio-video sync problems, when

watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).

sound Reset

Reset all sound settings to the factory defaults.

Setup Menu

setting the Time

¦

MEnU

O

m → setup → Time →

EnTER

E

Time

The current time will appear every time you press the

✎

InFO

button.

Clock

■

: Setting the clock is for using various timer

features of the TV.

If you disconnect the power cord, you have to set

✎

the clock again.

Clock Mode: Set up the current time manually or
automatically.

Auto

–

: Set the current time automatically using the

time from a digital channel.

The antenna must be connected in order to set

✎

the time automatically.

Manual

–

: Set the current time manually.

Depending on the broadcast station and signal,

✎

the auto time set up may not be correct. In this
case, set the time manually.

Clock set: Set the Month, Day, Year, hour, Minute
and am/pm.

Available only when

✎

Clock Mode is set to

Manual.
You can set the month, day, year, hour and minute

✎

directly by pressing the number buttons on the
remote control.

DsT (Off / On): Switches the DST(Daylight Saving Time)
function on or off.

This function is only available when the

✎

Clock

Mode is set to Auto.

Time Zone: Select your time zone.

This function is only available when the

✎

Clock

Mode is set to Auto.

Using the sleep Timer

¦

MEnU

O

m → setup → Time → sleep Timer →

EnTER

E

sleep Timer

■

t

: Automatically shuts off the TV

after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).

To cancel the

✎

sleep Timer, select Off.

setting the On/Off Time

¦

MEnU

O

m → setup → Time → Timer 1 →

EnTER

E

Timer 1 / Timer 2 / Timer 3

■

: Three different on / off

timer settings can be made. You must set the clock first.

Timer 1

L Move U Adjust E Enter R Return

On Time

Off Time

Volume

Source

Antenna

Channel

Repeat

Sun Mon Tue Wed Thu Fri

Sat

Inactivate

12

00

am

Inactivate

12

00

am

10

TV

Air

3

Once

▲

▼

BN68-03203A_Eng.indb 17

2010-08-24 �� 1:21:03

Advertising