Samsung SCH-A670ZSUXAR - Manual (Page 23)

Section 2: Understanding Your Phone 23
Understanding the Display
Section 2
No service indicator —Indicates your phone cannot
obtain service because you are outside a service area. You
cannot make or receive calls. Wait for a signal or move into
an open area to try and find a signal. The no service
indicator always appears when you turn on your phone and
disappears once service is located.
Roam —Extended roaming indicator. Roaming occurs
when your phone is outside your home area. While
roaming, a wireless system other than your wireless
provider’s may be handling your call, so the service rate for
the call may be higher than for a call within your home area.
Please refer to information from your wireless provider on
roaming rates.
New Message —Indicates that you have received a new
voice, text, page or web alert message. You are also notified
by visual and audible alerts.
1X Protocol —Indicates your phone is using the 1X data
protocol. The 1X protocol is capable of high-speed data
(3G).
IS95-2G Protocol —Indicates your phone is using the
IS95-2G protocol. This protocol is not capable of high
speed data.
Vibrate mode —Indicates your phone is in vibrate mode
(ringer is silent).
Battery strength —Indicates the battery charge level. The
more black bars, the greater the charge. When the battery
charge becomes very low, a flashing empty battery icon
displays and the phone sounds an audible alert, which
indicates your phone is about to shut down.
Alarm clock —The alarm clock is set.