Samsung SGH-A737HBAATT User Manual

Page 90

Advertising
background image

87

Note: The MEdia Net is pre-configured and cannot be altered on this screen. The AT&T MMS connection

option can be edited, renamed, or deleted on this screen. Your phone is set up by default for
connecting to the network. If you change the settings without first checking with your service
provider, the web browser, MMS, and e-mail features may not work properly.

5.

To create a new connection, press the Options soft key, select New, and

press the Select soft key or the

key.

- or -

6.

To edit the existing AT&T MMS, highlight this entry, press the Options soft

key, select Edit, and press the Select soft key or the

key.

7.

Select the parameter you want to edit:

• Set Name: enter a profile name.
• Access Name: edit the access point name.
• Auth Type: select the type of authentication used for this WAP connection:

None, Normal, or Secure.

• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to the network.
• Protocol: set the connection protocol used by the WAP browser: WAP, HTTP, or

Other.

• Home URL: enter the URL address of the page to be used as your homepage.
• Proxy address: set the proxy server address and port.
• Linger Time (Sec.): set a time period (in seconds) after which the network is

disconnected if there has been no new data traffic in that time.

• Advanced Settings: allows you to configure some of the IP-specific

information: Static IP, Static DNS, Server information, and Traffic Class.

-

Static IP: specify if you want to manually enter an IP address. If you want the IP

address to be automatically assigned by the server, remove the check mark.

-

Local Phone IP: allows you to configure the local phone IP address.

-

Static DNS: specify if you want to manually enter the Domain Name Server

(DNS) address. If you want the address to be automatically assigned by the
server, remove the check mark.

-

Server 1/Server 2: enter the Domain Name Server (DNS) addresses.

-

Traffic Class: select the traffic class.

Note: The WAP settings may vary depending on the service provider.

Advertising