Airplane mode – Samsung SGH-A867ZKAATT User Manual
Page 68
65
Change PIN code
This feature allows you to change your current PIN, provided that
the PIN check feature is enabled. The Check Pin Code field must
be active before you can access this function (page 63).
Note: This code is provided by AT&T. Entering an incorrect code can cause
the phone to lock, at which point, you will have to call AT&T customer
service for assistance.
1.
Touch the Change PIN Code field.
2.
Enter your PIN code and touch Save.
Change PIN2 code
The Change PIN2 code feature allows you to change your current
PIN2 to a new one. You must first enter the current PIN2
(obtained from AT&T) before you can specify a new one. Once
you have entered a new PIN2, you are asked to confirm it by
entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
1.
Touch the Change PIN2 Code field.
2.
Use the onscreen keypad/keyboard to enter your PIN2
code and touch
.
3.
Enter the new PIN2 code and touch
.
4.
Re-enter (reconfirm) the same code and touch
.
APN Control
Allows you to turn control of Access Point Names (APN) On or Off.
APNs are a method by which you can access advanced
communication using your handset. This advanced
communication can include instant messaging, multimedia
messaging, email, and Internet access. Turning On APN Control
requires the PIN2 code.
1.
Touch On or Off from the APN Control field.
2.
Press
to return to the previous Phone settings
page.
Airplane Mode
Airplane Mode allows you to use many of your phone’s features,
such as Games, Voice note, etc., when you are in an airplane or
in any other area where making or receiving calls or data is
prohibited. When your phone is in Airplane Mode, it cannot send
or receive any calls or access online information. The (
) icon
appears in place of the signal strength indicator when active.
1.
From Idle mode, touch
➔
Settings
➔
Phone.
2.
Touch On or Off from the Airplane Mode field.
Confirm
Confirm
Confirm
a867 Eternity.book Page 65 Tuesday, October 14, 2008 10:42 AM