Samsung SCH-S380ZKATFN - Manual (Page 43)

Understanding Your Contacts 39
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Contacts command to view contact information for
any named contact stored in your Contacts list by saying the name.
Note: The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1. In standby mode, press and hold .
“Say a Command” appears in the display and is pronounced
through the speaker.
2. Say “Lookup”.
VoiceSignal prompts you to “Say the name.”
3. Speak clearly and say the full name of the person you want to call,
exactly as it is entered in your contact list.
4. Say “Yes” to confirm the name or “No” to hear the next name, or
use the keypad to select the correct name from the list.
5. The contact information for the name you selected appears in the
display.
Keypad Methods
Find by Name
If you have stored a named contact in your Contacts list, Find lets you
locate the entry quickly.
1. In standby mode, do one of the following:
• Press the Down navigation key (Contacts shortcut) and select Find menu.