Troubleshooting and information codes, Check these solutions if your washer – Samsung WF231ANW-XAA User Manual

Page 29

Advertising
background image

troubleshooting and information codes

_29

troubleshooting and
information codes

CHECK THESE SOLUTIONS IF YOUR WASHER…

PROBLEM

SOLUTION

will not start..

• Make sure the door is firmly closed.

• Make sure your Washer is plugged in.

• Make sure the water source faucets are open.

• Make sure to press the Start/Pause Button to start your Washer.

• Make sure the Child Lock is not activated. See page 21.

• Before your Washer starts to fill, it will make a series of clicking noises

as it checks the door lock and does a quick drain.

• Check the fuse or reset the circuit breaker

has no water or not enough
water..

• Turn both faucets on fully.

• Make sure the door is tightly closed.

• Straighten the water inlet hoses.

•

The hose filter screens may be plugged. Disconnect the hoses and clean
the screens.

• Open and close the door, then press the Start/Pause Button.

has detergent remains in
the automatic dispenser
after the wash cycle is
complete.

• Make sure your Washer is running with sufficient water pressure.

• Make sure the Detergent Selector dial is in the upper position when

using granular detergent.

vibrates or is too noisy.

• Make sure your Washer is set on a level surface. If the surface is not

level, adjust your Washer feet to level the appliance.

• Make sure that the shipping bolts are removed.

• Make sure your Washer is not touching any other object.

• Make sure the laundry load is balanced.

stops

• Plug the power cord into a live electrical outlet.

• Check the fuse or reset the circuit breaker.

• Close the door and press the Start/Pause Button to start your

Washer.
For your safety, your Washer will not tumble or spin unless the door is
closed.

• Before your Washer starts to fill, it will make a series of clicking noises

as it checks the door lock and does a quick drain.

• There may be a pause or soak period in the cycle. Wait and it may

start.

• Check the screens on the inlet hoses at the faucets for obstructions.

Clean the screens periodically.

04 TROUBLESHOOTING

WF241ANW-02832E_EN_v1.indd Sec8:29

WF241ANW-02832E_EN_v1.indd Sec8:29

2011-08-10

4:20:53

2011-08-10

4:20:53

Advertising