Samsung SGH-S307SSACIN - Manual (Page 41)

76
Sound Settings
You can use the Sound Settings feature to
customize various settings, such as the:
• ring melody, volume and type.
• sounds made when you press a key, receive a
message, open/close the folder or switch your
phone on/off.
• alert tone made every minute during a call, when
you make an error or when your call is connected
to the system.
Note: When the phone is in the silent mode (see
page 28), you cannot change the sound
settings.
Ring Tone
(Menu 3.1)
This menu option allows you to select a ring
melody.
You can choose between many different melodies.
Each time you select a melody, it plays for a few
seconds. If you have downloaded sounds from the
Internet or received ring tone messages, you can
use them in this menu.
Ring Volume
(Menu 3.2)
This menu option allows you to adjust the ring
volume to one of five levels.
Use the and keys or the and keys on
the left side of the phone to increase or decrease
the volume.
Sound Settings
77
Alert Type
(Menu 3.3)
This menu option allows you to specify how you are
to be informed of incoming calls.
The following options are available:
Light only: the service light flashes the phone
neither rings nor vibrates.
Melody: the phone rings using the ring melody
selected via the Ring Tone menu option
(Menu 3.1); see page 76.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Keypad Tone
(Menu 3.4)
This menu option allows you to select a tone that
the phone sounds when you press a key.
You can select an option from Cool, Piano, Tone
and Beep. To turn off the sound, select OFF.