Samsung SPH-L520ZKPSPR - Manual (Page 14)

2. Plug the USB cable into the Charger/Accessory Jack on the bottom of the phone.
3. Plug the other end of the USB cable into the Charging Head, and then plug the Charging
Head into an electrical outlet to charge your battery. Fully charging a battery may take
up to three hours.
Note: Your phone’s battery should have enough charge to turn the phone on and find a signal,
run the setup application, set up voicemail, and make a call. You should fully charge the battery
as soon as possible.
4. Press and hold the Power/Lock Key to turn the phone on.
 If your phone is activated, it will turn on, search for Sprint service, and begin the
setup application.
 If your phone is not yet activated, see Activate Your Phone for more information.
Activate Your Phone
To activate your Sprint Prepaid service, you must register your phone online.
Register Your Phone on Sprint Prepaid
1. From your computer’s browser, visit sprint.com/prepaidactivate .
2. Choose an activation option and click Next, and then enter your ZIP code and click Next
3. When prompted, enter the serial number (MEID) printed on the label on your phone’s
packaging.
4. Follow the instructions to select a plan and payment method.
 If you’re swapping phones or bringing your number over from a different carrier,
follow the prompts to sign in or provide additional information.
5. Continue to follow the instructions to program your phone. Once you see the “Congrats”
page, your phone and plan are activated.
Phone Basics 3